| Famiglia |
GOMME ARABICHE |
|---|---|
| Gamma |
ALEA EVOLUTION |
| Variante | , , , , , |
| Condizioni di conservazione | , |
Arabique L30
Additional information
Aspetto
LIQUID
Dosaggi Consigliati
– 50 to 100 ml/hl as a rainfall preventive.
– 100 to 300 ml/hl to achieve an important organoleptic effect.
100 ml/hl brings about 5 mg/l SO2 to the wine
Caratteristiche Generali
Appearance: clear solution with a soft yellow color.
The high concentration of gum arabic present in ARABIQUE L30 allows a high contribution of softness and structure even at low dosages. Its botanical origins (Acacia Senegal) and chemical-structural characteristics make it possible to maximize the colloidal protection and structuring capacity of wines.
The sterile filtration to which it is subjected during production and the sulfur dioxide, present in free form, allow a long shelf life for the product and make it possible to use ARABIQUE L30 directly at bottling, without adding any microbial load to the wine.
Composizione
Levogyra gum arabic solution (30%) stabilized with SO2 (0.5% ± 0.1%).
Applicazioni
ARABIQUE L30 increases the smoothness and helps to strengthen the structure of treated wines, performing an important protective action against the coloring matter of red wines.
It is also indicated for the chemical and physical stabilization of finished wines to prevent cloudiness or precipitation of colloids and coloring matter.
ARABIQUE L30 naturally integrates the colloidal content of wine, improving its balance and organoleptic characteristics, particularly for the characters of softness and roundness of taste; it is recommended, for this purpose, to carry out laboratory tests to assess the optimal doses.
Modalità d'Uso
Addition of ARABIQUE L30 should preferably be done on wines during bottling, using an automatic doser after final filtration.
Since there is no in-line dispenser available, addition after the last filtration is recommended. In case of addition of ARABIQUE L30 on microporous cartridges smaller than 0.6 µm, it is recommended to check the filterability indices.
