| Famiglia |
DETERGENTI ALEADET |
|---|---|
| Gamma |
ALEA EVOLUTION |
| Variante | , |
| Condizioni di conservazione | , |
Aleadet GRAP S
Additional information
Aspetto
POWDER
Dosaggi Consigliati
Detersion Barrique – Tonneaux – maceration – 2-20 g/L (0.2-2%)
Detersion Vats and Casks – recirculating wash – 10-50 g/L (1-5%)
Caratteristiche Generali
Appearance: white-colored powder.
ALEADET GRAP S provides high sanitizing activity in removing most vegetative forms of microorganisms. It can be applied after surfaces have been thoroughly cleaned and rinsed.
ALEADET GRA P S is suitable for manual, immersion or spray applications.
Composizione
Powder sanitizer based on Potassium Permanganate and Sodium hydrogen sulfate.
Applicazioni
ALEADET GRAP S can be used on wood, stainless steel, galvanized iron, Teflon, polyethylene, resins, synthetic coatings in general, and rubber.
Modalità d'Uso
Reassembly applications: prepare solution (1-5%) with filtered and possibly softened water at room temperature. Wash by recirculation for 20-40 minutes. Then rinse thoroughly with potable water.
Maceration applications: prepare solution (0.2-2%) with filtered and possibly softened water at room temperature. Fill the container to be washed completely and leave in contact 12-24 hours depending on the concentration, temperature and degree of fouling to be removed. Empty the container, then rinse thoroughly with potable water.
All solutions containing ALEADET GRAP S should be thoroughly rinsed after use from all surfaces that come in contact with food and drink.
In case rinsing causes blue/purple staining of surfaces, rinsing with a 2-5% SO2 solution is recommended.
Refer to the MSDS for information on handling, PPE and storage of the product
